The effects of different process (cp, hp, cpop) on long cure (6-12+) OO and other plant based soap

Soapmaking Forum

Help Support Soapmaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 20, 2024
Messages
2
Reaction score
0
Location
United States
Good morning! I'm hoping some kind people could share their knowledge and experience about a topic I am confused on.

For those of you who make long cure (6-12+ months) OO soap and other plant oil/butter soap, do you use hp, cp, or cpop? Something else? If you've done more than one process are they identical at the same age other than appearance? If they behave differently can you describe how? My main concern is gentleness and drying as I have eczema and also sometimes get hives. I wont be addig any colors or fragrances. I've scoured the internet looking for answers to this question and I can't find it. Everything I've found is in reference to shorter cure soaps and says they make the same quality of soap. I did find some people saying that gelled cp is ready two weeks ahead of non gelled cp so I'm assuming the same must apply to hp??? But they also said the non gelled cp 'caught up' to the gelled cp around month 4. OO and other high oleic oils behave differently from other oils and need that long cure time so I'm not sure how much of this applies.

Any insight would be greatly appreciated!
 
Most soap requires at least a 4 week cure time, whether it gels or not. IMO, the longer the cure, the gentler the soap. Olive oil can take months to cure before it is at its best.
 
From what I know, the difference at the cure rate of different methods (CP, gelled CP, HP) is minimal to virtually nonexistent and is generally ignored. I'll use an example:

Let's say you make HP and the soap can be unmolded and cut in 12 hours. If you make the same recipe but CP (with decreased liquid) and you let it gel, you may be able to unmold and cut in 24 hours. If you don't gel the soap, it could take 48 hours for unmolding and cutting.

It's only a theoretical example to give you an idea, nothing more.

Now, the difference between the moment the ungelled and the HP soap start their cure is only 36 hours (48-12), but we know they both need cure and benefit from it the same (given the recipe is the same as well). This means when one soap has been cured for 4 months, the other has been cured for 4 months +/- 36 hours, which is very, very little difference in the long run. So it's safe to say that both batches are at more or less the same stage in their cure.

I need to mention that HP is usually made with more water, meaning more liquid to evaporate (which means it will get to the point it stops losing water content later than CP - and therefore it needs theoretically longer cure, contrary to popular belief). BUT keep in mind that curing doesn't only mean losing water - it means also structural changes inside the bar. So you can say that at one point, after a significant water loss, both bars will be at the same, or at least similar cure stage. To be safe ‐ a lot of soap recipes are said to be okay for use after 4‐8 weeks - and that's just the bare minimum, they get even better as time goes by. No matter the method, those (at least) 4 weeks are a must.

Now, castile soap is different. It needs at least 6 months to "start getting good", and at least a year to start being at "its arguably best", with some soapers reporting their castile is at its best at least 2 years after being cut. Of course, YMMV ‐ it's always good to experiment with what you like and see how it goes.

TL;DR: No matter the method you use (HP, CP gelled or CP ungelled), soap still needs more or less the same cure. And when it comes to OO, 6 months are 6 months.

With that being said, you can check out the recipe in this thread:

https://www.soapmakingforum.com/threads/zanys-no-slime-castile.72620/

It has sea salt, baking soda and 0% SF. OP claims it makes for a gentle slimeless castile bar that is great for sensitive skin and even babies. And what you may find even more interesting ‐ that at 6 week cure it feels as good as a regular castile at 1 year. I haven't made it and I can't confirm from experience, but a lot of members of the forum are really fond of this recipe ‐ who knows, maybe that's what you are looking for. I just thought my post wouldn't be complete if I don't include it. And sorry for the long message, HTH :)
 
From what I know, the difference at the cure rate of different methods (CP, gelled CP, HP) is minimal to virtually nonexistent and is generally ignored. I'll use an example:

Let's say you make HP and the soap can be unmolded and cut in 12 hours. If you make the same recipe but CP (with decreased liquid) and you let it gel, you may be able to unmold and cut in 24 hours. If you don't gel the soap, it could take 48 hours for unmolding and cutting.

It's only a theoretical example to give you an idea, nothing more.

Now, the difference between the moment the ungelled and the HP soap start their cure is only 36 hours (48-12), but we know they both need cure and benefit from it the same (given the recipe is the same as well). This means when one soap has been cured for 4 months, the other has been cured for 4 months +/- 36 hours, which is very, very little difference in the long run. So it's safe to say that both batches are at more or less the same stage in their cure.

I need to mention that HP is usually made with more water, meaning more liquid to evaporate (which means it will get to the point it stops losing water content later than CP - and therefore it needs theoretically longer cure, contrary to popular belief). BUT keep in mind that curing doesn't only mean losing water - it means also structural changes inside the bar. So you can say that at one point, after a significant water loss, both bars will be at the same, or at least similar cure stage. To be safe ‐ a lot of soap recipes are said to be okay for use after 4‐8 weeks - and that's just the bare minimum, they get even better as time goes by. No matter the method, those (at least) 4 weeks are a must.

Now, castile soap is different. It needs at least 6 months to "start getting good", and at least a year to start being at "its arguably best", with some soapers reporting their castile is at its best at least 2 years after being cut. Of course, YMMV ‐ it's always good to experiment with what you like and see how it goes.

TL;DR: No matter the method you use (HP, CP gelled or CP ungelled), soap still needs more or less the same cure. And when it comes to OO, 6 months are 6 months.

With that being said, you can check out the recipe in this thread:

https://www.soapmakingforum.com/threads/zanys-no-slime-castile.72620/

It has sea salt, baking soda and 0% SF. OP claims it makes for a gentle slimeless castile bar that is great for sensitive skin and even babies. And what you may find even more interesting ‐ that at 6 week cure it feels as good as a regular castile at 1 year. I haven't made it and I can't confirm from experience, but a lot of members of the forum are really fond of this recipe ‐ who knows, maybe that's what you are looking for. I just thought my post wouldn't be complete if I don't include it. And sorry for the long message, HTH :)
Thank you for your thorough response! I think I'll make zanys castile tomorrow. I want to test a variety of plant based soaps to see what my skin likes best and that one looks promising.
 
@Ekuzo thank you for posting!! I'm so happy to see someone posting about what cure really means! I still see YouTube and other sources giving out false information about cure times and what cure actually means.
:nodding:
My pleasure! It's actually nothing new - stuff I learned from the forum combined with a little bit of my experience and put in my own words for convenience. But I'm glad you find it useful!

Yes, YouTube is full of misleading info and important things often remain hidden by the content creator, that's why I stopped watching videos early on. Not to discredit all youtubers though, a handful of them provide really useful stuff. It's usually the more fancy ones that confuse the viewers lol

Thank you for your thorough response! I think I'll make zanys castile tomorrow. I want to test a variety of plant based soaps to see what my skin likes best and that one looks promising.
You're welcome! I'm not into castile, but if I decide to give it another chance, I'll definitely give ZNSC a go. People swear it's just too good and nothing like regular OO soap. Keep us updated how it turns out
 
Back
Top