Tiny zappy beads on top of my soap

Soapmaking Forum

Help Support Soapmaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Adema

Well-Known Member
Joined
Sep 10, 2009
Messages
197
Reaction score
0
Location
Iceland
I think it is because I insulated my mold a little bit to much, is it going to be a rebatch victim or can I just rince it off..
The inside of the soap is not lye heavy and it just partially gelled, I use a log mold and I made it 24 hours ago.

Kveðja
María
 
pics?? it sounds like some of your lye has not reacted with all of your oils...do you mind posting your recipe??

dont use it yet... zappy=unreacted lye...

you might need to rebatch...dont throw it away!!! just rebatch it if thats the case :)
 
I will try to post some pictures tonight, but my recipe was

49% olive
24 coconut
24 sheabutter
3% jojoba
Silk, sugar, lavender eo and powder oxides.

6% superfat, I use a premix of 33% lye solution and it was 641grams. for my 1600gr batch. I have some lavender buds on top so you can't see the beads very well but It definetly zaps.


Kveðja
María
 
if it's because your soap overheated and sweated in the mold you might be ok. try rinsing the bars and setting aside to see what happens.

but cut one up first, to see if there are lye pockets. if you don't see any, lick some of the inside/cut surfaces to check for general lye-heaviness.
 
carebear said:
if it's because your soap overheated and sweated in the mold you might be ok. try rinsing the bars and setting aside to see what happens.

but cut one up first, to see if there are lye pockets. if you don't see any, lick some of the inside/cut surfaces to check for general lye-heaviness.


I cut and licked the whole log and it is zap free on the inside and no lye pockets.
I found an older post from you where you wrote about soap being hygroscopic and being as curious as I am I had to google it and it was very interesting,,


Kveðja
María
 
A little update,, I licked the top of my soap and there is no zap at all, I did not rinse it I just waited until it seeped into my soap and now it is fine. Thank you guys for all the replies..

Kveðja
María
 
Adema said:
A little update,, I licked the top of my soap and there is no zap at all, I did not rinse it I just waited until it seeped into my soap and now it is fine. Thank you guys for all the replies..

Kveðja
María

:D

Im a soaplicker too :)
 

Latest posts

Back
Top