Every time I read a post on here I learn something useful! So, citrus EO and EVOO will slow down a trace, eh? Ooooo, ahhhhh!!! The lightbulbs are popping off in my head!! Thank you! Canāt wait to see your soaps!Everyone's entries so far look amazing! I actually made soap tonight for the first time in a few months, I think. We are running low at home, a friend asked for some bars, and hey! there's a challenge deadline in less than 48 hours! No pressure!
Seriously, I have no idea how tonight's soap is going to look. I made a batch of CHAL-YA first, pouring one rectangular loaf on a diagonal, one rectangular loaf just flat, and one flat in a square loaf. I started to add a mica line to the flat square one, but it wasn't looking that great, so I quit. The others will be just plain (and hopefully straight) lines.
Then I realized I was out of MB lye... hmmm. Remembered some rice-water cubes in the freezer. Made up a new batch of lye with that and recalled how fun it is to make lye solution with icey stuff. No fumes!
By the time I was done with all that faffing around, the first batch had firmed up well in the molds. Made the second batch of plain stuff, and was pleasantly reminded just how much a good measure of OO plus citrus EO will really sloooooow down trace. Wow. Plenty of time to use that SB before reaching even light trace, with such a nice fluid pour. There was even enough leftover from the plain batch to pour into a few of my wave cavity molds, which are always favorites.
Now everything is covered and on the heating pad to gel for a bit. Soap room smells great, I'm happy, and maybe tomorrow there will be a challenge entry. Maybe.
Yes, citrus EOs definitely slow trace, as long as they aren't old/oxidized. I believe it is our challenge hostess @KiwiMoose who adds citrus EOs to naughty FOs to slow trace. She counts on the scent of the citrus EO to fade quickly during cure, so it doesn't end up interfering with the FO itself. Genius, eh?Every time I read a post on here I learn something useful! So, citrus EO and EVOO will slow down a trace, eh? Ooooo, ahhhhh!!! The lightbulbs are popping off in my head!! Thank you! Canāt wait to see your soaps!
For my example batch, I poured the ciaglia first with a cardboard divider already wedged into the corner of the mold, and then as I poured the ciaglia portion I leaned the cardboard over the top to the opposite corner until the ciaglia was encapsulated into a triangle shape. I left it sitting in the mold with the cardboard on top while I mixed up the plain part. When that was ready to pour I dragged the cardboard divider up the diagonal, scraping it against the top edge of the mold to ensure a slick edge. Gave it a quick press over the top with a flat knife to ensure it was straight, and then poured the plain into the triangular shaped cavity left in the mold. I preferred the ciaglia first because I was using an accelerating FO with the ciaglia so i knew I would get a crisp edge to put the plain soap directly onto in the same soaping session.@ScentimentallyYours I saw your recommendation in the entry thread about pouring the ciaglia section last/on top. I totally agree! As soon as I had poured in my ciaglia, I realized that the chunks, no matter how small, were going to prevent me from having a perfectly straight line. If I'd poured in the plain portion first, at a nice thin emulsion, it would have flattened out perfectly and created a straight line onto which I could pour the ciaglia portion. Oh well. Live and learn!
Honestly, with the citrus EOs and with more OO than I normally use, I has plenty of time to SB to mix my shreds, oils, and lye solution together for almost a minute before reaching a light trace. I'd rather do that than grate soap any time, unless I had a salad shooter to do the grating for me.
If that is true, I wonder if citrus EOās could be added to a bad FO to decelerate it? For instance, I could add it to Cracklinā Birch, knowing that I would usually get soap on a stick. If it slowed the trace down, even a little, that would be great because the citrus fragrance would disappear by the end of the cure. Itās worth an experiment, isnāt it?In her column pour video Teri of Tree Marie Soaps says that citrus oils actually decelerate trace because citrus contains degreasers, which keep the batter loose for longer, or even make it a little looser when added.
That's what I do.If that is true, I wonder if citrus EOās could be added to a bad FO to decelerate it? For instance, I could add it to Cracklinā Birch, knowing that I would usually get soap on a stick. If it slowed the trace down, even a little, that would be great because the citrus fragrance would disappear by the end of the cure. Itās worth an experiment, isnāt it?
Enter your email address to join: