Can I use Red Moroccan clay and sea salt together? Im not to familiar with clays. Would that be over the top using the two and be more drying?
Sea salt using Red Moroccan clay
- Thread starter Spice
- Start date
Help Support Soapmaking Forum:
It all depends on the rest of the recipe, but I bet it would work out nicely. Id make sure to use full water and Id probably mix the clay right in with the water before the lye, and stir well before adding to the oils so as not to leave any clay behind. With the 20% superfat typical on salt bars, I do not find them drying at all, even with 80% coconut oil.
I didnt know that salt bars needed to be superfatted:-(. And since I've never worked with clay, I didnt know to add the clay to water before lye, either. Boy I have alot to learn.
Yes, salt bars should be at least 80% coconut oil so they will lather well and that means a increased SF so they won't be drying. 15-20% SF is the standard for a salt bar.
Salt bars also set up pretty dang fast and if you wait too long to cut, they will crumble. Need to check every hour or so and as soon as the loaf if firm enough to unmold, you need to cut. Using cavity molds saves you from having to time the cutting.
Dry ingredients are much easier to get mixed in if they are wet first. You don't have to add it to the lye water but it cuts out a step that way.
Salt bars also set up pretty dang fast and if you wait too long to cut, they will crumble. Need to check every hour or so and as soon as the loaf if firm enough to unmold, you need to cut. Using cavity molds saves you from having to time the cutting.
Dry ingredients are much easier to get mixed in if they are wet first. You don't have to add it to the lye water but it cuts out a step that way.
Crombie
Well-Known Member
I know that clays are water soluable, but I sift them over my warm oils and let sit for 15 minutes - then stick blend; followed by the lye solution. That works great for me.
I have heard that Red Moroccan Clay stains - tubs and washcloths - so I have been afraid to use it.
I have heard that Red Moroccan Clay stains - tubs and washcloths - so I have been afraid to use it.
Candybee
Well-Known Member
Never heard of clays staining. I suppose it could if you use way too much. I know too much of some oxides and charcoal can stain.
A typical use for clays is 1 tsp up to 1 tbs PPO. I tend to use 1 tbs per 3 lb batch so that comes out to roughly 1 tsp PPO.
A typical use for clays is 1 tsp up to 1 tbs PPO. I tend to use 1 tbs per 3 lb batch so that comes out to roughly 1 tsp PPO.
I've not noticed that, even on the batch I used way too much (1.75 Tbsp in 14 ounces of oils), but I don't have any white washcloths either...
Do ALL clay need to be add into the lye/water before using?
I order my clay and as soon as I get I will use your guide of 1 tsp to 1 tbs PPO. I think that will work for now. Hope to have my clay and soap by end of week. However, I will be at a car show this weekend so I will post ASAP after that. Love this forum. :razz:
I can do a HP salt bar too?
Crombie
Well-Known Member
YES! You can HP salt bars!
All my salt bars are HP. Recommendations: Definitely use SL (2% ppo) - it helps with the fluidity and crustiness. Be prepared to work uninterruped and fast. Definitely recommend silicone mold with individual cavities (I use one from Brambleberry that has 12 rectantular 4 oz cavities). Put mold on cookie sheet. Don't overcook! Don't waste time trying to even out the cavities - get it poured in as quick as you can. Bang well on counter then cover with Glad Wrap Press N Seal or wax paper. Smooth tops of soap well.
- About an hour after you mold the soap, it will be will be almost firm. If you can gently remove it without denting in, do so. At this point, if I can handle soap without damaging it, I use a planner and smooth the tops well.
- Fine or superfine salts work best. I use Mediterreanan sea salt, black lava Hawaiian salt, or pink Himalayan salt. Photos are one of each type of salt. The black lava salt bars are Eucalyptus EO, the white salt bars are a spa FO, and the pink are a blend of pink grapefruit and Bergamot EOs. The black lava have a little activated charcoal and the pink grapefruit have a little French pink clay.
All done HP crock pot. 50% salt. 20% SF. 1 oz EO/FO ppo. 2% SL. Recipes for all were 85% coconut oil, 15% avocado oil (or a butter), and 5% castor oil. I use 1 tsp ppo DME (dry malt extract) in all my soap recipes except my 100% coconut oil 20% SF soap.
- At Christmas I make some that look exactly like chimney bricks.
------------------------------------
www.sadiesmissionsoaps.com
All my salt bars are HP. Recommendations: Definitely use SL (2% ppo) - it helps with the fluidity and crustiness. Be prepared to work uninterruped and fast. Definitely recommend silicone mold with individual cavities (I use one from Brambleberry that has 12 rectantular 4 oz cavities). Put mold on cookie sheet. Don't overcook! Don't waste time trying to even out the cavities - get it poured in as quick as you can. Bang well on counter then cover with Glad Wrap Press N Seal or wax paper. Smooth tops of soap well.
- About an hour after you mold the soap, it will be will be almost firm. If you can gently remove it without denting in, do so. At this point, if I can handle soap without damaging it, I use a planner and smooth the tops well.
- Fine or superfine salts work best. I use Mediterreanan sea salt, black lava Hawaiian salt, or pink Himalayan salt. Photos are one of each type of salt. The black lava salt bars are Eucalyptus EO, the white salt bars are a spa FO, and the pink are a blend of pink grapefruit and Bergamot EOs. The black lava have a little activated charcoal and the pink grapefruit have a little French pink clay.
All done HP crock pot. 50% salt. 20% SF. 1 oz EO/FO ppo. 2% SL. Recipes for all were 85% coconut oil, 15% avocado oil (or a butter), and 5% castor oil. I use 1 tsp ppo DME (dry malt extract) in all my soap recipes except my 100% coconut oil 20% SF soap.
- At Christmas I make some that look exactly like chimney bricks.
------------------------------------
www.sadiesmissionsoaps.com
Last edited:
Since I hate all oily feelling soaps I superfat my salt bars at 15% and they are fine wth 80% coconut oil with 100% fine salt
That one looks amazing! I'm going to have to find some black salt!
Earthen_Step
Well-Known Member
I have been adding my clay when I add my essential oils. I add the clay to a little water that I discount from my water/NaOH solution to help it disperse quickly.
Beautiful salt bars and nice looking website Crombie! I can't wait to start playing with salt bars.
Last edited:
These are nice bars.:mrgreen:
You have beautiful soap! Thank you for the help. I will be making my soap soon. When I do I will post pic. Thanks again.:-D
