ISO cleaning hack

Soapmaking Forum

Help Support Soapmaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Apr 5, 2018
Messages
3,761
Reaction score
13,242
Location
Minnesota
Hey, Soap Peeps! I have one of these thangs:
1736817295672.png


I have soaked it in water & Dawn for several days and scrubbed with a sponge for a long time. It still feels oily. Hit me up if you have any tricks on cleaning it. Thanks!
 
I have that same tray! I have no hacks, but this is what works best for me.

Put it in hot hot hot soapy (Dawn) water for a few minutes.
Run more hot water over it to rinse off the soap (and hopefully at least some of the darn beeswax)
Quickly wipe it with a dry paper towel, or five.
If I come across resolidified wax while drying, then back into the hot hot water it goes, to rinse and repeat.

This seems to remove most of the wax, but I admit, it never feels completely wax-free. Would love to hear if anyone has better luck with a different process.
 
"Power Wash" is just Dawn with an added solvent. Amazing stuff, but if you have some >95% ethanol or isopropol alcohol on hand.... Mind you, the sprayed foam really works!

A cationic or amphoteric detergent? Dawn is Anionic with nonionic.

Hydrogen Peroxide? There's other mild oxidizers.

Soak it in lye water?
 
I have a one step process...
Step 1: pour directly into tubes with no spilling.

Just kidding. I scrape mine with a plastic thingy, use a paper towel to wipe out any holes. If I see any spots that are particularly difficult, I will hit it with my hot air gun with the tray placed on paper towel. Wash in hot water with Dawn.
If they still feel sticky or slick after that, I spray with iso alcohol and wipe with a paper towel.
Still sticky? I throw it in my dishwasher. (really, any oil/wax that's left is going to be minimal by this point. There's more oil on my cooking pans than on this lip balm tray at this point.)

I have seen some videos where people do the scrapey thing with the filled tubes still in the tray. I guess it kind of makes sense then that the overspill wouldn't get pushed into the empty tray holes... I just can't bring myself to do it. The naturally rounded tops on lippies is too satisfying.

Occasionally they're a pita to clean, but I wouldn't make lippies without one.
 
Hey, Soap Peeps! I have one of these thangs:View attachment 80642

I have soaked it in water & Dawn for several days and scrubbed with a sponge for a long time. It still feels oily. Hit me up if you have any tricks on cleaning it. Thanks!
I was checking them out on the weekend! After I took me 30min to make the lip balms and 4 hours for the clean up. I did a bigger batch 60 from 10 that I had done before, lol. I made a BIG mess and pretty much had to wipe down every single lip balm container. Not fun!
I was shaking my head while I was cleaning them and thinking.. there must be a better way!

I see that some companies send these with the 50 pack and was planning to try it next time.
Is this tool helpful?

Step 1: pour directly into tubes with no spilling.
Yes that is what happened on my first time making them! I might try a porcelain jug with a good spout.

but to answer @Zing! Could you put this tool in the freezer?
I wonder if the plastic material is flexible enough, and once frozen if you flex it if the excess would come right off?
 
I have a one step process...
Step 1: pour directly into tubes with no spilling.

Just kidding. I scrape mine with a plastic thingy, use a paper towel to wipe out any holes. If I see any spots that are particularly difficult, I will hit it with my hot air gun with the tray placed on paper towel. Wash in hot water with Dawn.
If they still feel sticky or slick after that, I spray with iso alcohol and wipe with a paper towel.
Still sticky? I throw it in my dishwasher. (really, any oil/wax that's left is going to be minimal by this point. There's more oil on my cooking pans than on this lip balm tray at this point.)

I have seen some videos where people do the scrapey thing with the filled tubes still in the tray. I guess it kind of makes sense then that the overspill wouldn't get pushed into the empty tray holes... I just can't bring myself to do it. The naturally rounded tops on lippies is too satisfying.

Occasionally they're a pita to clean, but I wouldn't make lippies without one.
I literally was laughing out loud at "pour directly into tubes with no spilling", first as WTHeck Yeah Right and then with Oh, Joke Alert!:D
 

Latest posts

Back
Top