Containers for Master Batching

Soapmaking Forum

Help Support Soapmaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Apr 5, 2017
Messages
793
Reaction score
2,387
Location
Massachusetts
What containers do you recommend for master batching oils and lye solution? I was so impressed to read @Vicki C’s work master batching production level quantities. (Wow!) I’m only looking at small scale avocational artisan quantities.

I have been using one a gallon polypropylene jug for MB 50:50 lye. The advantage of the sturdy PP jug is that I can put it in a hot water bath to re-dissolve NaOH crystals that precipitate from solution when basement temps go below 70° F. These are what I use.
https://www.amazon.com/WUWEOT-Resis...B08KZRTV93&psc=1&ref_=pd_basp_m_rpt_ba_s_3_sc

Now I’d like to find containers for MB all hard & soft oils for a recipe in individual batches. The purpose of individual batches is so that if the oils separate, they will still be in the correct proportions when I go to use them. (In a large container they could separate with harder oils at the top and liquid oils below, which would mess up the recipe, unless I melted the entire container and stirred it.)

For a single recipe I need to store about 1250g of oils in each batch, so I’m looking at 1/2 gallon polypropylene containers. I could also look into 1 gallon containers of the same type for double batches. I have ruled out bottles because I cannot scrape them with a spatula to make sure I get all of the oil, even if I warm the bottles first, so I would end up with inaccurate measurements. I found these and think they may work well.
https://www.amazon.com/AKOLAFE-Buck...ucket+lid+polypropylene&qid=1740596260&sr=8-4

Do folks have other recommendations for small scale MB containers? I’m up for repurposing containers if they are something I would use anyway, or ordering them from Amazon or the Webstaurant store. Help, please! 🙏
 
What containers do you recommend for master batching oils and lye solution? I was so impressed to read @Vicki C’s work master batching production level quantities. (Wow!) I’m only looking at small scale avocational artisan quantities.

For soap oils, I use round Cambro containers with lids. Quart, half gallon, gallon, 1.5 gallons, 2 gallons, 3 gallons. Bought them from restaurant Depot. They're here at webstaurant

For bath and body stuff I use the square Cambro containers same sizes as soap ones but no quart and an added 5+ gallons.

This was the two don't mix.

They're all dishwasher safe and mostly microwaveable. The 5 gallon ones don't fit🤣. The handles are convenient and they are sturdy.

I use quart and pint deli bowls for the lye waters and oils sometimes for small batches. I use the 3.5oz ketchup things for fragrance oils for small batches.


1000020131.jpg

All with lids.

For the masterbatched lye I'm using a carboy and a bucket. As well as the essential depot lye containers.

For the lye beads I'm using two 5 gallon dry buckets to store the sixteen 2 pound essential lye Depot bottles. With gamma airtight lids.

I though I was a small soaper but now I'm thinking maybe I'm not so small...🤯
 

Latest posts

Back
Top