PlainJaneEssentials
New Member
I've been making soap for a while and decided to try my had at incorporating wine into a cold-process soap in April, 2019. My recipe used was:
12 oz. Distilled H20
11.96 oz. Sodium Hydroxide
12 oz. Pinot Noir with Alcohol Boiled off and chilled to just above freezing
28 oz. Olive Oil
24 oz. Coconut Oil, 76 degree
16 oz. Palm Kernel Oil Flakes, hydrogenated
8 oz. Castor Oil
4 oz. Almond Oil, sweet
I soaped at room temperature (roughly 70 degrees F).
I added 4 oz. of Pink Sangria Fragrance Oil from Wholesales Supplies Plus.
I added 2 Tablespoons of Pink Kaolin Clay plus 2 Tablespoons of TD to one half of the soap batter for a nice pink.
I added 2 Tablespoons of Pink Koalin Clay and Black and Red Micas to turn the other half of the batter to a deep burgundy color.
This was for a 5# loaf.
When the soap was first removed from the mold, it smelled not so good.
After reading several posts from other soapers in the community, I heard that this was quite common and that I should sit tight until the soap in question was fully cured and that the bad odors should go away after a few weeks of curing time.
We are on week 5 and going into week 6. None of my other soaps have had these kinds of issues. . The soap in question still doesn't smell right to me. (In all fairness, I didn't think that the original smell of the FO was that great either, but hoped that it would compliment the natural odors imparted from the Pinot Noir.)
Is this normal for a wine cold-process soap? When will I know that the soap has reached its best self?
This one has me stumped! I look forward to your comments.
Thanks!
12 oz. Distilled H20
11.96 oz. Sodium Hydroxide
12 oz. Pinot Noir with Alcohol Boiled off and chilled to just above freezing
28 oz. Olive Oil
24 oz. Coconut Oil, 76 degree
16 oz. Palm Kernel Oil Flakes, hydrogenated
8 oz. Castor Oil
4 oz. Almond Oil, sweet
I soaped at room temperature (roughly 70 degrees F).
I added 4 oz. of Pink Sangria Fragrance Oil from Wholesales Supplies Plus.
I added 2 Tablespoons of Pink Kaolin Clay plus 2 Tablespoons of TD to one half of the soap batter for a nice pink.
I added 2 Tablespoons of Pink Koalin Clay and Black and Red Micas to turn the other half of the batter to a deep burgundy color.
This was for a 5# loaf.
When the soap was first removed from the mold, it smelled not so good.
After reading several posts from other soapers in the community, I heard that this was quite common and that I should sit tight until the soap in question was fully cured and that the bad odors should go away after a few weeks of curing time.
We are on week 5 and going into week 6. None of my other soaps have had these kinds of issues. . The soap in question still doesn't smell right to me. (In all fairness, I didn't think that the original smell of the FO was that great either, but hoped that it would compliment the natural odors imparted from the Pinot Noir.)
Is this normal for a wine cold-process soap? When will I know that the soap has reached its best self?
This one has me stumped! I look forward to your comments.
Thanks!