Pouring technique

Soapmaking Forum

Help Support Soapmaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jofa

Well-Known Member
Joined
Oct 4, 2017
Messages
55
Reaction score
38
Hey guys!

So I tried this technique today twice and failed badly. So here I am looking for someone that help me.figure out how this soap is poured.

Thank you!
20180703_002455.jpg
20180703_002433.jpg
 
I think it's a steady hand consistently pouring down the middle, which pushes the underlying layers up against the walls at equal rates. Easier for me to say than do, though.

What did you do, and how did it turn out?
 
CaraBou that's exactly what I did. Maybe my soap wasn't the right consistency tough. Maybe it had to be more fluid. I'm sure gonna try again because it's such a beautiful design.
My soap turned out in layers. Like ordinary layers.
Thank you
 
It could very well be something like that dibbles.
 
I think that they have made 6 different loafs but the soaps that are laid out on top each come from a different loaf, not one.

This is similar and I make one too: you just pour down the middle of the mold with different colours. You do have to start with the batter at emulsion (not light trace) and keep pouring one after the other pretty quickly. You can pour as much as like of each colour.
TIger stripe.jpg
 
My funnel pour soaps from last December look similar.

full


The cut makes a difference as well, not just the pour. With the above soap, I poured into a tall container, then when I cut, I turned the soap on its side and got these. If I had cut from the top of the pour downward (without turning the soap on it's side) the bars would have looked very different.
 
Hey guys,

So many beautiful soaps!

Carabou was right. I tried again last night and the result was pretty similar. Not perfect, but I think that's the right way to go.
Some things I've learned from this last experience: The consistency of the soap batter has to be in the middle. More on the fluid side, but not too much, and not too thick. Your can't tap your mold, otherwise the lines will be straight like layers. You can't do a ton of layers, it's best to do 2 of each color. And, finally, as Carabou said, a steady hand, pouring slowly, is required.

I hope it helps and that some of you try this amazing design.
As soon as I get a result I really like, I'll post here!

Thank you for your help and interest. :)
 
Thank you, guys! See Carabou? You said it. ☘
If one of you try it too, I would love to see!
 
Back
Top