Curing round soaps

Soapmaking Forum

Help Support Soapmaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Nov 1, 2020
Messages
1,419
Reaction score
5,179
Location
New Hampshire
Okay smart people, maybe this has been addressed before but I couldn’t find anything - I’d love to know how people cure their round soaps. @TashaBird you make tons of round soap, do you have a nifty way to cure / store them? I am imagining a long cardboard semicircle or M shape that they could sit in vertically in a tidy row, and I might try to make something like that, but maybe someone has a brilliant solution. My method has been just to have them lying flat, but that takes up space and the down facing side isn’t getting any air flow.

Thanks!
 
Not @TashaBird ..... But I cure my round soaps standing up. Before I built my curing rack, I had under the shelf coated wire racks in my linen closet. I covered the with freezer paper to make sure there was no soap touching exposed metal. They were pretty cool because the wire kept the round soaps in place, and it didn't take over too much of my space for curing soaps. Plus it made my linens smell real pretty. With my curing racks they fit well in between the slats if the shelves. I just need to be careful placing them, sometimes the wood edges can mark the soap edges if they are too soft. I'm sure if you had some strips of cardboard to put in or on what ever you cure your soaps in on either side of a row of soaps will keep them from rolling.
 
I'm abusing upcycling the shabby plastic drawers that pig's ear pastries come with. They have a ribbed bottom where upright/leaning soap bars find some hold.
round_soap_drawer.jpg
If stacked up a bit steeper, double that amount of soaps (not only round ones) fit in there. They touch the ground and each other at single contact points, so there is no major covering that impedes evaporation. In case of sweating, the drawers are water-proof (lifesaver with salt bars, lol).

Two downsides: they are a bit flabby for the weight I put on them, so they're not really mobile when full, and secondly, someone has to eat all these puff pastries in the first place. 😋
 
I don’t know what that thick rough cardboard (used for packaging these days instead of styrofoam) is called (pressboard?) but I’m sure there is packaging for something that would be just right.
 
I cure mine standing up, and lay a thin strip of cardboard along side them so they don't roll. My soap dungeon floor is not level, even though the shelf is, it has happened that my clumsy self has bumped the shelf and caused them to roll. The piece of cardboard (laid flat, not standing up) gives just enough ridge to stop the roll.
 
May I suggest looking at cardboard egg cartons to stand them up?
they're often pliable enough to reform to fit the shape you want.
You could then stack them on top of each other if you have room.
 
Reviving this thread because today I had an idea that WORKED! I cure my soaps on trays on bakery racks - the trays are 18”x26”. Today I bought a sheet of corrugated pvc at a box store that was 26” x 96”.
It cuts easily with scissors and is PERFECT for round soaps! I could cram them onto every row, but won’t - the soaps touch if I do that. These are mostly 2.75”, a few are 3.”
Apologies to my metric speaking friends but you get the idea.
736CFC0F-C04A-4DC1-A7B6-6642E7D5F19D.jpeg
310109DE-4B29-4CB7-997D-A1ABA1D13C49.jpeg
FD4B5EB7-B3F4-46D9-88AB-BF49C1BB5E38.jpeg
05C120BE-1F6F-4D11-BE53-D435FAC9DFE4.jpeg
 
Back
Top