I have a couple of silicon soap molds that were exposed to dispersed oxides and micas in oil. I've scrubbed with Dawn and they have soaked forever in water and Dawn but are still stained. Hit me up if you have an effective hack. Thanks!
Cleaning up dispersed colorants stains?
- Thread starter Zing
- Start date
Help Support Soapmaking Forum:
coastmutt
Well-Known Member
I suggest these directions from SoapQueen's blog!
"Spray the mold liberally with rubbing alcohol and allow the alcohol to sit on the mold for 15-20 minutes. Spray again with alcohol and rub off with a paper towel, then give the mold another wash with dish soap and water."
"Spray the mold liberally with rubbing alcohol and allow the alcohol to sit on the mold for 15-20 minutes. Spray again with alcohol and rub off with a paper towel, then give the mold another wash with dish soap and water."
