Quote
I also am sure to have white vinagar opened and within reach, just in case, because it's said to neutralize lye
I'm not sure exactly how this myth got started, but it is not correct. Here's some info from 2 MSDS sheets, one for a 50% solution and one for dry.
http://www.setonresourcecenter.com/msds ... d046de.htm
Material Safety Data Sheet
CAUSTIC SODA <50% , SODIUM HYDROXIDE SOLUTION
SECTION V - Reactivity Data
Stability Conditions to Avoid: MIXTURE WITH WATER, ACID OR INCOMPATIBLE MATERIALS CAN CAUSE SPLATTERING AND RELEASE OF LARGE AMOUNTS OF HEAT
SECTION VI - Health Hazard Data
Emergency/First Aid Procedures: [SKIN] IMMEDIATELY WASH EXPOSED SKIN WITH PLENTY OF SOAP AND WATER WHILE REMOVEING CONTAMINATED CLOTHING AND SHOES. GET IMMEDIATE MED ATTEN. WASH CLOTHING BEFORE REUSE AND THROW AWAY SHOES WHICH CANNOT BE THOROUGHLY CLEANED.
http://www.jtbaker.com/msds/englishhtml/s4034.htm
Material Safety Data Sheet
SODIUM HYDROXIDE
3. Hazards Identification
Emergency Overview
—————————————
POISON! DANGER! CORROSIVE. MAY BE FATAL IF SWALLOWED. HARMFUL IF INHALED. CAUSES BURNS TO ANY AREA OF CONTACT. REACTS WITH WATER, ACIDS AND OTHER MATERIALS.
4. First Aid Measures
Skin Contact:
Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Call a physician, immediately. Wash clothing before reuse.
Notice that both say the sodium hydroxide reacts with acid. Vinegar is acidic, albeit mild (white vinegar has maybe 5% acetic acid). But acid is acid, and even a small amount can react with lye and cause even more injury (would you deliberately aggravate a burn injury?).
Both say the proper procedure for skin contact is to flush/wash the skin with plenty of water, and nothing about neutralizing the lye. Both are saying massive dilution is the way to go.